Home > Owners > Technology > Sync Support > Sync 2 > How to install updated in your vehicle

How to Install System Update using SYNC 2 | Ford Australia

SYNC® 2 SUPPORT

 How to install updates in your vehicle

At certain points during the update installation, the screen in your vehicle may go dark as the system reboots. You will also hear audible “Installation Complete” messages. They refer to specific phases of the installation, not the overall upgrade process. 

Please note:

•  Ensure you have already downloaded the updates to your USB.

 

•  Take note of the saved Navigation points stored in your Satellite navigation system. You will need to re-enter them after the installation. 

 

•  Please ensure that your car is in a well-ventilated area. Your vehicle will need to be turned on, with the engine running, for about 20 - 30 minutes to complete the upgrade 

 

SYNC® 2 SUPPORT

 How to install updates in your vehicle

At certain points during the update installation, the screen in your vehicle may go dark as the system reboots. You will also hear audible “Installation Complete” messages. They refer to specific phases of the installation, not the overall upgrade process. 

Please note:

•  Ensure you have already downloaded the updates to your USB.

•  Take note of the saved Navigation points stored in your Satellite navigation system. You will need to re-enter them after the installation. 

•  Please ensure that your car is in a well-ventilated area. Your vehicle will need to be turned on, with the engine running, for about 20 - 30 minutes to complete the upgrade 

 

How to install the updates in your vehicle

1. Plug the USB in and wait until the screen displays “the update will last about 30 minutes” message. Press Ok to start the installation. 

2. Wait at least twenty minutes to check the screen. Press OK and remove the USB if the screen displays “You have successfully  updated your SYNC software to Gen2 – Vx.x” message.The upgrade is complete.

1. Plug the USB in and wait until the screen displays “the update will last about 30 minutes” message. Press Ok to start the installation. 

2. Wait at least twenty minutes to check the screen. Press OK and remove the USB if the screen displays “You have successfully  updated your SYNC software to Gen2 – Vx.x” message.The upgrade is complete.

More SYNC® 2 Support

More SYNC® 2 Support

Find Dealer

Locate A Dealer

Connect nearest dealer to help you.

Locate A Dealer

Connect nearest dealer to help you.

Contact Us

Contact Us

Get in touch with an official Ford representative 

13-3673

Contact Us

Get in touch with an official Ford representative 

13-3673

Top