home > Owners > Technology > Sync Support > Sync 1 > How to install the updates in your vehicle

Install updates In Your Ford with SYNC 1 | Ford Australia

 SYNC® SUPPORT

How to install the updates in your vehicle

Note:

. Ensure you have already downloaded the updates to your USB.

. Take note of the saved Navigation points stored in your Satellite navigation system. You will need to re-enter them after the installation. Your devices need to be set-up again once the upgrade is complete.

. Please ensure that your car is in a well-ventilated area. Your vehicle will need to be turned on, with the engine running, for about 20 - 30 minutes to complete the upgrade

 SYNC® SUPPORT

How to install the updates in your vehicle

Note:

. Ensure you have already downloaded the updates to your USB.

. Take note of the saved Navigation points stored in your Satellite navigation system. You will need to re-enter them after the installation. Your devices need to be set-up again once the upgrade is complete.

. Please ensure that your car is in a well-ventilated area. Your vehicle will need to be turned on, with the engine running, for about 20 - 30 minutes to complete the upgrade

sync

At certain points during the update installation, the screen may go dark for several minutes at times as the system reboots. You will also hear audible “Installation Complete” messages. They refer to specific phases of the installation, not the overall upgrade process. When last phase is complete, SYNC® will reboot and then show a normal working screen display instead of installation screen display.

1.Plug in the USB drive with the update; your vehicle needs to be turned on with engine running.

2.Press “Menu” and Select “SYNC-Settings” then Press “OK”.

3.Select “Install on SYNC” and Press “OK

4.“Begin SYNC installation?” will display. Press “Yes” to confirm.

SYNC will display “Installing SYNC file” during the process. After about 1min, SYNC will display “SYNC is rebooting…”.

5.After 30s, SYNC prompts “your download is in progress, and your system may reboot several times during the update. Please wait about 20min until you hear SYNC system update was completed, you may then use SYNC”. The popup “SYNC is rebooting…” will * disappear after about 10s, and the screen will not display anything.*  

Do not remove your USB drive or turn off your vehicle or SYNC system while this update is in progress

6.In about 20 minutes, SYNC will prompt “SYNC system update was completed. The system is now on reboot. Please wait a few moments before trying to use the system”. After 20s, SYNC will display “Installation Complete”; The system is then initializing, which may take several minutes.

7.After initializing SYNC will prompt to Press “MENU” to exit installation mode.  It is now safe to remove your USB drive and drive the vehicle or turn it off.

To complete the process, take the USB drive to your computer to report the successful installation.

At certain points during the update installation, the screen may go dark for several minutes at times as the system reboots. You will also hear audible “Installation Complete” messages. They refer to specific phases of the installation, not the overall upgrade process. When last phase is complete, SYNC® will reboot and then show a normal working screen display instead of installation screen display.

1.Plug in the USB drive with the update; your vehicle needs to be turned on with engine running.

2.Press “Menu” and Select “SYNC-Settings” then Press “OK”.

3.Select “Install on SYNC” and Press “OK”

4.“Begin SYNC installation?” will display. Press “Yes” to confirm.

SYNC will display “Installing SYNC file” during the process. After about 1min, SYNC will display “SYNC is rebooting…”.

5.After 30s, SYNC prompts “your download is in progress, and your system may reboot several times during the update. Please wait about 20min until you hear SYNC system update was completed, you may then use SYNC”. The popup “SYNC is rebooting…” will * disappear after about 10s, and the screen will not display anything.*  

Do not remove your USB drive or turn off your vehicle or SYNC system while this update is in progress

6.In about 20 minutes, SYNC will prompt “SYNC system update was completed. The system is now on reboot. Please wait a few moments before trying to use the system”. After 20s, SYNC will display “Installation Complete”; The system is then initializing, which may take several minutes.

7.After initializing SYNC will prompt to Press “MENU” to exit installation mode.  It is now safe to remove your USB drive and drive the vehicle or turn it off.

To complete the process, take the USB drive to your co

At certain points during the update installation, the screen may go dark for several minutes at times as the system reboots. You will also hear audible “Installation Complete” messages. They refer to specific phases of the installation, not the overall upgrade process. When last phase is complete, SYNC® will reboot and then show a normal working screen display instead of installation screen display.

1.Plug in the USB drive with the update; your vehicle needs to be turned on with engine running.

2.Press “Menu” and Select “SYNC-Settings” then Press “OK”.

3.Select “Install on SYNC” and Press “OK

4.“Begin SYNC installation?” will display. Press “Yes” to confirm.

SYNC will display “Installing SYNC file” during the process. After about 1min, SYNC will display “SYNC is rebooting…”.

5.After 30s, SYNC prompts “your download is in progress, and your system may reboot several times during the update. Please wait about 20min until you hear SYNC system update was completed, you may then use SYNC”. The popup “SYNC is rebooting…” will * disappear after about 10s, and the screen will not display anything.*  

Do not remove your USB drive or turn off your vehicle or SYNC system while this update is in progress

6.In about 20 minutes, SYNC will prompt “SYNC system update was completed. The system is now on reboot. Please wait a few moments before trying to use the system”. After 20s, SYNC will display “Installation Complete”; The system is then initializing, which may take several minutes.

7.After initializing SYNC will prompt to Press “MENU” to exit installation mode.  It is now safe to remove your USB drive and drive the vehicle or turn it off.

To complete the process, take the USB drive to your computer to report the successful installation.

puter to report the successful installation.

 

More SYNC® Support

More SYNC® Support

kba

Locate A Dealer

Connect nearest dealer to help you.

Locate A Dealer

Connect nearest dealer to help you.

kba

Contact Us

Get in touch with an official Ford representative 

13-3673

Contact Us

Get in touch with an official Ford representative 

13-3673

Top