How do I use the Zone Lighting* feature?

Zone lighting use can be adjusted using the Ford app or your vehicle's SYNC® screen.

Zone Lighting Pre-Conditions

The following are conditions that must be met to use the Zone Lighting feature:

  • Zone Lighting availability: The lights for the specific Zone Lights are not in use or being used by other features.
  • Vehicle disposition: Your vehicle needs to be in Park mode.
  • Good battery level: Your vehicle battery must not be drained or be at a low level (i.e., below 75%).
  • Stable connectivity: The Ford app and your vehicle need to be connected. If connectivity is affected, the feature turns off.

Using Zone Lighting

Choose a dropdown below to learn how to use Zone Lighting, based on the method you want to use.

Using Zone Lighting in the Ford App

  1. Log in to the Ford app.
  2. Navigate to the Vehicle screen.
  3. Tap the Features & Settings header.
  4. Select the Zone Lighting tile.
  5. Tap the Power button to enable the feature. If the Power button is greyed out, it is not enabled.
  6. Select the zone you want to enable. The state of the feature is displayed as follows:
    • Blue: The lights are on.
    • Dark grey: The feature is enabled, and the lights are off.
    • Transparent gray: The feature is disabled.

      Note: Tap All Zones to enable all zone areas. 
       
  7. Select the Power button to turn off the lights and feature once you are done. 

Note: There can be a two- or four-zone option. This is determined by the trim level of the vehicle and can only be known when you access the Zone Lighting screen.

  • Two-zone option: This option contains Front and Rear zones.
  • Four-zone option: This option contains Front, Rear, Left and Right zones.

Using the Zone Lighting Feature in Your SYNC Screen

  1. Ensure that your vehicle is on, running, and in Park.
  2. Tap the Vehicle icon on your SYNC screen.
  3. Scroll down and select Zone Lighting.
  4. Slide the Power toggle to the right to turn on the feature.
  5. Select the zone or zones you want to enable.

    Note: Tap All Zones to enable all zone areas. 
     
  6. Slide the Power toggle to the left to turn off the lights and feature once you are done. 

Note: There can be a two- or four-zone option. This is determined by the trim level of the vehicle and can only be known when you access the Zone Lighting screen.

  • Two-zone option: This option contains Front and Rear zones.
  • Four-zone option: This option contains Front, Rear, Left and Right zones.

*Feature is vehicle trim level specific. If your vehicle is not equipped, the option will not appear.