What is Adaptive Cruise Control?

Your vehicle may be fitted with Adaptive Cruise Control with Stop & Go and Lane Centering. Adaptive Cruise Control with Stop & Go is designed to not only adjust your cruising speed but can also stop and relaunch the engine if traffic slows to a standstill. What's more, when engaged, Lane Centering is designed to provide active steering assistance, by following road markings, to help you keep you centered in your lane.

For specific information on your vehicle, refer to your Owner's Manual.

Adaptive Cruise Control allows you to set a cruising speed and monitors traffic ahead, maintaining a safe distance between vehicles.

Some of the features include:

  • Uses advanced radar technology to monitor traffic ahead to scan for slower vehicles.
  • Slows the vehicle to adapt for current traffic conditions and maintain a safe distance between vehicles.
  • Once traffic clears, it automatically returns the speed to the speed set with the Cruise Control System.
  • Feature is automatically on and can be turned off via the Message Centre.

Conventional Cruise Control

When activated, Cruise Control lets you maintain a set speed without keeping your foot on the accelerator pedal. You can use Cruise Control when your vehicle speed is greater than 30 km/h.

The cruise controls are on the steering wheel.

Setting the Cruise Control Speed

  1. Press ON the cruise control switch on your steering wheel.
  2. The indicator light will appear in the information display. The indicator changes color to indicate the system status.
  3. Drive to your desired speed.
  4. Press SET.
  5. Take your foot off the accelerator.

Changing the Set Speed

  1. Press SET to change the set speed in small increments.
  2. Press and hold either button to change the set speed in large increments. Release the button when you reach the speed you prefer.
  3. Press the accelerator or brake pedal until you reach the speed you prefer. Press SET.
  4. Press the accelerator or brake pedal until you reach the desired speed. Press SET.

Cancelling Cruise Control

Press the Cancel (CNCL) or X button on the steering wheel, or apply the brakes.

Resuming Cruise Control

To resume after cancelling, press the RES button.